Notifications
Clear all

[Sticky] We are hiring - Technical writer  

Page 1 / 2
  RSS
Jakub Dolezal
(@jakub-dolezal)
Member Admin
We are hiring - Technical writer

Hi,

we are expanding our Content team and currently looking for a skilled 3D enthusiast, who will join us in creating new content for the community. 

WHO ARE WE LOOKING FOR?

For a colleague, who enjoys 3D printing and has a general overview of the technologies, materials, and procedures. We are looking for a walking 3D printing encyclopedia. You will write guides for the users and help them with the issues they encounter while using the printer. You must be consistent, precise, and fluent in English. All the articles are primarily written in English, then translated into multiple languages.

WHAT’S THE JOB ABOUT?

As a technical writer, your typical task will be a description of a new feature in the firmware or a solution to a problem with the printer. You will do your research, write the article, discuss it with the developers and other experienced colleagues. You will test the suggested procedure directly on the printer, take pictures, shoot the video yourself, or in cooperation with other colleagues from the Content team.

In case the provided solution requires replacing some parts on the printer, you will do it together with our guide gurus. On the e-shop you will check the availability of the parts, verify their description, and if anything will be missing, inform the product manager.

WHAT YOU SHOULD KNOW/HAVE?

  • experience with 3D printing and troubleshooting
  • the ability to write comprehensible instructions
  • advanced English
  • basics of DSLR photography including post-processing
  • be polite but strong and consistent in communication with the developers
  • able to work independently without constant supervision
  • preferably based in the Czech Republic

WHAT ELSE DO WE LOOK FOR?

  • experience with technical documentation
  • experience with video making
  • interest in 3D printers and general knowledge of the market

WHAT DO WE OFFER?

  • A company to be proud working for, helping share the Open Source initiative
  • Startup culture, direct contact with the supervisors, flexible working hours
  • Learn from the best, we have many years of experience in the field
  • Salary based on your skills and experience
  • Access to the 3D printers for your own projects
  • We will help you to further improve your 3D printing skills
  • Access to the Haribo bears, for scientific purposes of course

 

Are you interested? Send me an e-mail to jakub[DOT]dolezal[AT]prusa3d[DOT]com. Introduce yourself, describe your experience, share your projects and I will get in touch.

Looking forward to meeting you 🙂 

Jakub

This topic was modified 3 years ago by Jakub Dolezal
Assembly manuals

/ Knowledge Base
The guy behind Prusa assembly manuals...

Posted : 26/01/2021 6:49 pm
davidparker, Antonio, Sirrober126 and 1 people liked
muddymaker
(@muddymaker)
Trusted Member
RE: We are hiring - Technical writer

I nominate bobstro👍

Posted : 26/01/2021 6:55 pm
pimogo liked
cwbullet
(@cwbullet)
Member
RE: We are hiring - Technical writer

@muddymaker

He would be a great choice if he is not currently over engaged.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 26/01/2021 7:15 pm
bobstro
(@bobstro)
Illustrious Member
RE: We are hiring - Technical writer
Posted by: @muddymaker

I nominate bobstro👍

Believe me, 30 years ago I would have loved it! Prusa sounds like an awesome company. It would be tough now, though I'm happy to contribute. 

This makes me think Prusa is about to do for documentation what they've done for slicers. Good news for users!

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 26/01/2021 7:43 pm
Paulgs
(@paulgs)
Active Member
RE: We are hiring - Technical writer

Is the position still open?

I am a retired Technical Writer. I developed manuals for electrical and electronic equipment as well as software.  I wrote for Industrial Testing, Medical, as well as Transportation equipment. I put together the main Software Control manual, and added to the Hardware Hookup and Troubleshooting manual for a Process Control System used at Power Plants (Coal and Nuclear), and Waste Water plants built by Emerson Process Management.

I am new to 3D printing, but have experienced and fixed several several problems building and running the new 3D printer. I have used the forum and found several helpful tips that could go into a Troubleshooting section or as a new manual.

I do not have a second language but, I have edited several manuals written in other languages that I transferred into English. 

I look forward to talking to you about this position.

Paul G. Schaaf

I have sent information on what I think was a correction to the Installation manual and have several others I will add later.  

Posted : 01/06/2021 4:31 pm
nastasiya09
(@nastasiya09)
New Member
RE: We are hiring - Technical writer

i am ready to do work with you

Posted : 20/02/2022 6:06 pm
nastasiya09
(@nastasiya09)
New Member
RE: We are hiring - Technical writer

I am new to 3D printing, but have experienced and fixed several several problems building and running the new 3D printer. I have used the forum and found several helpful tips that could go into a Troubleshooting section or as a new manual. verizon wifi

mobdro

Posted : 21/02/2022 9:14 am
Paulgs
(@paulgs)
Active Member
RE: We are hiring - Technical writer

Not sure what the post is all about. If this is a Technical Writer position opening and it is still available, I am interested.

Posted : 22/02/2022 2:17 pm
Frank
(@frank-8)
Estimable Member
RE: We are hiring - Technical writer

I'm an old broke-down engineer from the 70's with some time on my hands, so I might be interested in doing some part-time technical writing from my home here in Ohio.  I have done lots of technical writing over my career, and it turns out I have a particular eye for English prose - I can spot a typo or a context mistake from a mile away in the middle of a thunderstorm ;).

As far as qualifications, I would refer you to my blog site 'Paynters Palace' at fpaynter.com, where you can see what I've been doing.  I currently have a Prusa MK3S and a FlashForge Creator Pro 2 IDEX printer, but I have previously worked with several other printers.

Let me know

Frank

 

Posted : 23/03/2022 3:46 pm
martinkh
(@martinkh)
Eminent Member
RE: We are hiring - Technical writer

Um, the First Step is read the instructions. Attention to detail is important for tech writers. Email him per his instructions.

Posted : 29/03/2022 1:21 am
ZombiPach liked
Jeffrey Barnes
(@jeffrey-barnes)
New Member
RE: We are hiring - Technical writer

I am ready to work with you

Posted : 04/04/2022 11:33 am
jackwhite
(@jackwhite)
New Member
RE: We are hiring - Technical writer

Hello! If the position is open, please let me know. Thank you

Jack White - professional journalist and custom writing this content for education newspaper

Posted : 09/10/2022 10:32 am
panid
(@panid)
New Member
RE: We are hiring - Technical writer

 

Posted by: @frank-8

I'm an old broke-down engineer from the 70's with some time on my hands, so I might be interested in doing some part-time technical writing from my home here in Ohio.  I have done lots of technical writing over my career, and it turns out I have a particular eye for English prose - I can spot a typo or a context mistake from a mile away in the middle of a thunderstorm ;).

As far as qualifications, I would refer you to my blog site 'PayntersPalace' at fpaynter.com, where you can see what I've been doing.  I currently have a Prusa MK3S and a FlashForge Creator Pro 2 IDEX printer, but I have previously worked with several other printers.

Let me know

Frank

 

I have opportunity

Posted : 05/01/2023 4:40 pm
DAniel
(@daniel-22)
New Member
RE: We are hiring - Technical writer

I'm highly interested, How much Experience is required for it and should candidate have IT background?

Posted : 15/02/2023 2:23 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: We are hiring - Technical writer

did you read the first post fully?

Joan

 

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 16/02/2023 8:17 pm
allied usa
(@allied-usa)
New Member
RE:

 

Posted by: @frank-8

I'm an old broke-down engineer from the 70's with some time on my hands, so I might be interested in doing some part-time technical writing from my home here in Ohio.  I have done lots of technical writing over my career, and it turns out I have a particular eye for English prose - I can spot a typo or a context mistake from a mile away in the middle of a thunderstorm ;).

As far as qualifications, I would refer you to my blog site 'Paynters Palace'at fpaynter.com, where you can see what I've been doing.  I currently have a Prusa MK3S and a FlashForge Creator Pro 2 IDEX printer, but I have previously worked with several other printers.

Let me know

Frank

 

Which other printers ??

This post was modified 1 year ago 4 times by allied usa
Posted : 22/02/2023 7:19 pm
Janet Gentry
(@janet-gentry)
Member
RE: We are hiring - Technical writer

I'm not sure I get the point of this post. I am keen on applying if the opportunity for a Technical Writer is still open.

Posted : 18/10/2023 4:15 am
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: We are hiring - Technical writer

Did you read the first message?

The information is in that post. Including the information about applying for the position 

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 18/10/2023 9:46 am
Advika
(@advika-2)
Member
RE: We are hiring - Technical writer

I'm a seasoned engineer from the 1970s era who finds himself with some spare time these days. I'm considering the prospect of engaging in part-time technical writing from my home in Ohio. Throughout my career, I've accumulated extensive experience in technical writing and have developed a keen eye for the nuances of English prose. You could say I can spot a typo or a contextual error from a mile away, even in the midst of a thunderstorm!

In terms of qualifications, I'd like to direct you to my blog, 'Paynters Palace,' which can be found at fpaynter.com. There, you can get a sense of my work and what I've been up to. Presently, I operate a Prusa MK3S and a FlashForge Creator Pro 2 IDEX printer, but I've had experience with several other 3D printers in the past.

Posted : 27/10/2023 10:51 am
rajesh891
(@rajesh891)
Member
RE: We are hiring - Technical writer

Hello, I am ready to do work with you. 

Posted : 03/01/2024 8:10 am
Page 1 / 2
Share: