Notifications
Clear all

Print thin objects  

  RSS
andMattia
(@andmattia)
Active Member
Print thin objects

hi All I try to print a thin object but it is not printed. I try to change all dimensions from 100% to 135% and its show on slicer which is my mistake?

I load some print screen to show the slicer status

This topic was modified 2 months ago by andMattia
Posted : 05/08/2021 3:24 pm
andMattia
(@andmattia)
Active Member
Topic starter answered:
Settings

I add the print sceen

This i the printer on 100 %

If I move to 135% this is the result

Posted : 05/08/2021 3:32 pm
Ringarn67
(@ringarn67)
Reputable Member
RE: Print thin objects

@andmattia

Save project file (3mf), ZIP it, Upload it 
That way it is easier to see and understand your problem.

(I Think your lines in "36" are too thin 😉)

Prusa I3 MK3S+ (kit dec -20), PrusaSlicer, Fusion 360, Windows 10...
Posted : 05/08/2021 3:35 pm
bobstro
(@bobstro)
Illustrious Member
Try toggling detect thin walls, model walls are likely just too thin

You can try enabling or disabling Print Settings->Layers and perimeters->Quality->Detect thin walls. As @Ringarn67 notes, your walls may simply be too thin for your selected nozzle and perimeter settings.

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 05/08/2021 3:48 pm
Share: