[Solved] Can‘t reach prusaprinters.org  

  RSS
nils.kaluza
(@nils-kaluza)
New Member

Hi there,

I have a strange issue going on, I‘m not able to open prusaprinters.org anymore (blog.prusaprinters, or shop.prusa.org all work, also every other page on the internet), when I try with 4G via cell phone, it works though. It seems to me that my IP is blocked to the page although there shouldn‘t be the slightest reason for this. Are there any similar issues going on for you guys?

I already checked my router, even though I didn‘t change anything on it anyway, it also happens for all devices in my network

This topic was modified 2 months ago by nils.kaluza
Posted : 11/09/2020 7:45 pm
joan.t
(@joantabb)
Veteran Member Moderator

Just tried 

https://blog.prusaprinters.org/

from the UK. it worked...

https://www.prusaprinters.org/  

Also worked. 
~
has this ever worked for you? 

Is it working now?

Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 12/09/2020 5:58 pm
bobstro
(@bobstro)
Illustrious Member

Working well from New England US region.

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 12/09/2020 6:03 pm
justin.m4
(@justin-m4)
Trusted Member

Had that happen a few times too.  Some peculiar goings on the internet...

try going through Prusa3D.com and Support - that will get you to Forum And Prints...

This post was modified 2 months ago by justin.m4
...
Posted : 12/09/2020 6:09 pm
nils.kaluza
(@nils-kaluza)
New Member

It seems to be up and running again 

Posted : 12/09/2020 7:20 pm
joan.t
(@joantabb)
Veteran Member Moderator

Thanks Folks

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 12/09/2020 7:28 pm
ChillyPenguin
(@chillygeo)
Eminent Member

I had similar issues about a week ago. I resioved it by changing the DNS server I was using.

Posted : 13/09/2020 8:13 pm
donny
(@donny)
New Member

I experienced the same thing a week ago. Prusaprinter.org cannot be accessed.
Even I got banned from this forum. I don't know why. Finally I wrote an email to support@prusa3d.com. Luckily, I was unbanned immediately. Together with that the prusaprinter.org can be opened again.
by the way, I'm from Indonesia

To have or to be?...
Posted : 15/09/2020 2:40 am
Share:

Please Login or Register