Notifications
Clear all

Bottom Layer Fill Patterns  

  RSS
RedDawg
(@reddawg)
Reputable Member
Bottom Layer Fill Patterns

Searched around previous posts for a discussion of this but didn't find anything that directly addresses it. I frequently use the Hilbert Curve fill pattern for the top layer because of the pleasing texture it puts on the part.  This begged the question: What would a bottom layer fill pattern of the Hilbert Curve (or any non-rectilinear pattern) look like? So I tried it. Apart from the first layer taking forever to print (it was a fairly large piece), there wasn't much to see because subsequent layers simply cover over the Hilbert pattern and the bottom surface of the part simply takes on the character of the bed, which in this case was the smooth PEI surface. So wouldn't this be the case for ANY pattern chosen, in which case, what's the point of allowing the bottom layer fill pattern parameter to be changed in the first place? Am I missing something subtle?

Hear ye, Hear ye! Step right up folks and get your Government salvation here! Less than $.002 per word! Amazon.com/dp/B0B8XMMFP4

Posted : 24/06/2020 7:14 pm
CovertPluto3502
(@covertpluto3502-2)
Trusted Member
RE: Bottom Layer Fill Patterns

It’s there so that you can change it to your likings, but I would go for rectilinear as it is the easiest to print and gives the model strength as well as adhesion on the bed. Honestly, I have trouble with a curve on my first layer.

Posted : 26/06/2020 6:02 am
RedDawg
(@reddawg)
Reputable Member
Topic starter answered:
RE: Bottom Layer Fill Patterns

@covertpluto

My point is that, for the bottom layer, it doesn't matter what pattern I choose, the finished print still looks the same, so why offer the option to change it?

Hear ye, Hear ye! Step right up folks and get your Government salvation here! Less than $.002 per word! Amazon.com/dp/B0B8XMMFP4

Posted : 26/06/2020 12:13 pm
Chocki
(@chocki)
Prominent Member
RE: Bottom Layer Fill Patterns

I've  used archimedian chords on a circular base and found with the textured base you end up with an 8 segmented pattern in the light as you move it around when printed with a glossy petg filament, looked great on the end of my air rifle moderator.

Normal people believe that if it ain’t broke, don’t fix it. Engineers believe that if it ain’t broke, it doesn’t have enough features yet.

Posted : 28/06/2020 8:13 pm
CovertPluto3502
(@covertpluto3502-2)
Trusted Member
RE: Bottom Layer Fill Patterns

@reddawg

You still can see the individual extrusion lines at the bottom of the print with the smooth sheet. It is just less pronounced than the ones at the top, the setting is there so that you can change it. For example, I can clearly tell the difference between different infill patterns, it may be for more of an aesthetic reason. For mechanical parts I don’t see any reason to change it to anything but rectilinear. You can experiment with the different patterns, and see which one works for you. This is how it works, you experiment with settings and come up with ones that work best.

Posted : 28/06/2020 8:51 pm
Share: