Notifications
Clear all

400 x 400 Prusa Printer?  

Strona 8 / 19
  RSS
Mabau
(@mabau)
Trusted Member
RE: 400 x 400 Prusa Printer?
Posted by: @charles-h13

8 inches or 200mm x 200 mm is fine for most of what I print.  I need height.  

Well, modding the printer for more height is a comparable easy task. You just need some new plastic parts (z-top-holder), longer z-rods and a FW change to make the printer printing 265mm max height.

I can just link the mod again: https://www.thingiverse.com/thing:2947340

Opublikowany : 03/10/2019 6:00 pm
Birdman2010
(@birdman2010)
Eminent Member
RE: 400 x 400 Prusa Printer?

OH MY GOD!!!!!!   Is Josef going to unveil a big 3D printer??????   PLEASE SAY YES!!!!!!!!!!

Twitter post by Josef:  https://t.co/cYFkuo0u2C

I CAN'T WAIT FOR THE UNVEIL!!!!!!  TELL ME NOW!!!!!!!

Dancing with Joy!

Opublikowany : 11/10/2019 2:56 pm
Chocki
(@chocki)
Prominent Member
RE: 400 x 400 Prusa Printer?

You do realise that a larger printer heated bed say 400 x 400 is going to use a lot more power, just over 3x as much.

Normal people believe that if it ain’t broke, don’t fix it. Engineers believe that if it ain’t broke, it doesn’t have enough features yet.

Opublikowany : 11/10/2019 3:19 pm
CybrSage
(@cybrsage)
Honorable Member
RE: 400 x 400 Prusa Printer?
Posted by: @chocki

You do realise that a larger printer heated bed say 400 x 400 is going to use a lot more power, just over 3x as much.

Not sure many people care about that.  Just look at how many buy an 80 inch TV vs a 60 inch one.

 

I do not need a larger printer, but my are thrilled to have one.

Opublikowany : 11/10/2019 3:29 pm
Birdman2010
(@birdman2010)
Eminent Member
RE: 400 x 400 Prusa Printer?

@chocki

I have a CR-10 with a 300x300 bed.  I use it more often that my Prusa MK2s because of the bed size.  The CR-10 is a piece of crap and I keep having to upgrade and fix it.  I waste a huge amount of time trying to get the CR-10 to print big models.  The Prusa MK2s is much more reliable and I'm sure that it uses less power.  However, everything that I want to print is too big for that printer.  For example, this is my latest print:

https://www.instructables.com/id/Magic-Wand-TV-Remote/

If I can get a bigger Prusa printer, I can get the Prusa reliability and still be able to print the big models.  The bigger printer will take more power and the bigger models will take more filament to print.  Of course!  If I want to save power and filament, I can get rid of my printers.  If I want to have fun and print big things, I can pay for the power and buy some more filament!

 

Opublikowany : 11/10/2019 3:37 pm
cwbullet
(@cwbullet)
Member
RE: 400 x 400 Prusa Printer?

I think the new prusa will be announced this weekend.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/10/2019 3:49 pm
cwbullet
(@cwbullet)
Member
RE: 400 x 400 Prusa Printer?
Posted by: @cybrsage
Posted by: @chocki

You do realise that a larger printer heated bed say 400 x 400 is going to use a lot more power, just over 3x as much.

Not sure many people care about that.  Just look at how many buy an 80 inch TV vs a 60 inch one.

 

I do not need a larger printer, but my are thrilled to have one.

I certainly don’t.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/10/2019 4:19 pm
Chocki
(@chocki)
Prominent Member
RE: 400 x 400 Prusa Printer?

Nicely timed for us in the UK to place an order before this abomination called Brexit wrecks the country, and after which we may have to pay WTO import tax. And don't even mention how much the value of the £ will drop...

Normal people believe that if it ain’t broke, don’t fix it. Engineers believe that if it ain’t broke, it doesn’t have enough features yet.

Opublikowany : 11/10/2019 4:21 pm
cwbullet
(@cwbullet)
Member
RE: 400 x 400 Prusa Printer?
Posted by: @cybrsage
Posted by: @chocki

You do realise that a larger printer heated bed say 400 x 400 is going to use a lot more power, just over 3x as much.

Not sure many people care about that.  Just look at how many buy an 80 inch TV vs a 60 inch one.

 

I do not need a larger printer, but my are thrilled to have one.

I certainly don’t.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/10/2019 4:23 pm
CybrSage polubić
Chocki
(@chocki)
Prominent Member
RE: 400 x 400 Prusa Printer?

I don't either, but it's something to be aware of. I honestly admit, I'm not the most energy conscious person going.

Normal people believe that if it ain’t broke, don’t fix it. Engineers believe that if it ain’t broke, it doesn’t have enough features yet.

Opublikowany : 11/10/2019 4:46 pm
CybrSage polubić
CybrSage
(@cybrsage)
Honorable Member
RE: 400 x 400 Prusa Printer?

Personally, I want them to come out with a smaller resin printer, on sized for miniatures, sonit is far cheaper and yet high quality.

Opublikowany : 11/10/2019 5:00 pm
cwbullet
(@cwbullet)
Member
RE: 400 x 400 Prusa Printer?
Posted by: @cybrsage

Personally, I want them to come out with a smaller resin printer, on sized for miniatures, sonit is far cheaper and yet high quality.

Naw.  No reason to go smaller.  We need HUGE.,  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/10/2019 5:25 pm
bobstro
(@bobstro)
Illustrious Member
RE: 400 x 400 Prusa Printer?
Posted by: @charles-h13

Naw.  No reason to go smaller.  We need HUGE.,  

Pocket printers. We definitely need pocket-sized 3D printers.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Opublikowany : 11/10/2019 5:30 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: 400 x 400 Prusa Printer?

It is prism-shaped under that sheet. A box? CoreXY? A box full of coreXY? It may not be printer at all, they can just bring big box full of tchotchkies, some fancy-pantsy printed stuff, or one giant Gumi bear. Then again, I hope it’s new printer model. But it could be anything. But please be a new printer... ok enough. I am really curious.

Opublikowany : 11/10/2019 5:43 pm
cwbullet
(@cwbullet)
Member
RE: 400 x 400 Prusa Printer?

it could be small but in a huge box.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/10/2019 6:02 pm
91d3on Mining
(@91d3on-mining)
Eminent Member
RE: 400 x 400 Prusa Printer?
Posted by: @bobstro
Posted by: @charles-h13

Naw.  No reason to go smaller.  We need HUGE.,  

Pocket printers. We definitely need pocket-sized 3D printers.

New printers are cool and all, but it would be awesome to get back to the core ideal of RepRap and continue development on self replication

Opublikowany : 11/10/2019 8:07 pm
cwbullet
(@cwbullet)
Member
RE: 400 x 400 Prusa Printer?
Posted by: @bobstro
Posted by: @charles-h13

Naw.  No reason to go smaller.  We need HUGE.,  

Pocket printers. We definitely need pocket-sized 3D printers.

That may lower your reproductive potential.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/10/2019 8:44 pm
Mabau
(@mabau)
Trusted Member
RE: 400 x 400 Prusa Printer?

We may expect a sensor upgrade with a new IR Sensor (TCRT5000):

https://github.com/prusa3d/IR-MH-sensor-PCB

Opublikowany : 11/10/2019 9:30 pm
cwbullet
(@cwbullet)
Member
RE: 400 x 400 Prusa Printer?
Posted by: @marvin-b

We may expect a sensor upgrade with a new IR Sensor (TCRT5000):

https://github.com/prusa3d/IR-MH-sensor-PCB

That is not a big announcement.nn

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/10/2019 9:54 pm
cwbullet
(@cwbullet)
Member
RE: 400 x 400 Prusa Printer?
Posted by: @marvin-b

We may expect a sensor upgrade with a new IR Sensor (TCRT5000):

https://github.com/prusa3d/IR-MH-sensor-PCB

That is not a big announcement.nn

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/10/2019 9:54 pm
Strona 8 / 19
Share: