Notifications
Clear all

3D Printers Anonymous  

Strona 1 / 2
  RSS
cwbullet
(@cwbullet)
Member
3D Printers Anonymous

I officially have an addiction.  I have too many printers and my addition just keeps growing!

 

Does anybody have this problem?

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 10/06/2020 2:29 pm
bobstro
(@bobstro)
Illustrious Member
RE: 3D Printers Anonymous
Posted by: @charles-h13

I officially have an addiction.  I have too many printers and my addition just keeps growing!

You don't have too many printers, you don't have enough extruders and hotends.

 

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Opublikowany : 10/06/2020 3:15 pm
Vegas Pay LLC polubić
Tracy
(@tracy)
Trusted Member
RE: 3D Printers Anonymous

I have just the Mini but I'm definitely obsessed. I've printed so much useless junk my wife complains about it. I have to stop myself from buying new filament colors because I want them all! And I spend way too much time searching thingiverse, myminifactory and cults3d for stuff to print.

Opublikowany : 10/06/2020 3:52 pm
GertL polubić
jsw
 jsw
(@jsw)
Famed Member
RE: 3D Printers Anonymous

I don't call it a 'problem', but a fascination, and a tool that I'm using quite a bit for all kinds of model RR stuff and various other gadgets.  I find myself using it far more than I ever intended.

Had I not had this activity during the dark days of the lockdown, I think I would have gone totally nuts!

I also have advanced to the point that I think I can confidently answer some of the simpler and more routine questions here, particularly those that I had and worked through on my climb up the learning curve.

Now, a friend of mine, who got her printer shortly after I did, admits she's more hooked, and wrote me the other day that she's trying to self-discipline herself to not download and print all kinds of stuff that she will never use.  (I recommended that she join this forum but I have not seen her post.)

Opublikowany : 10/06/2020 4:55 pm
Olef
 Olef
(@olef)
Prominent Member
RE: 3D Printers Anonymous

I too have this problem.

 

Whenever  I need space for a new printer (shiny newtoy that is) I give one of my old ones to my son. He is perfectly fine with that although my daughter in law is not so sure 🙂

Opublikowany : 11/06/2020 12:01 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: 3D Printers Anonymous

With my new success with PC and PP filaments, I may buy another to dedicate. 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/06/2020 1:41 pm
jsw
 jsw
(@jsw)
Famed Member
RE: 3D Printers Anonymous

Lately I seem to be hoarding filament, but once the Covid hit the fan, it seemed like what I liked was always in short supply.  If I find something that I use in stock at a decent price, I will snap it up.

I have no clue where I would find space for a second printer, but the length of some prints is making me think that a second one would be nice.

Opublikowany : 11/06/2020 2:29 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: 3D Printers Anonymous

I have the same issue.  Too many rolls of filament.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 11/06/2020 2:41 pm
Chocki
(@chocki)
Prominent Member
RE: 3D Printers Anonymous

Yeah, me too, but it was a much better price before the lockdown, unfortunately I have been working all the time so not had much free time to print.

Normal people believe that if it ain’t broke, don’t fix it. Engineers believe that if it ain’t broke, it doesn’t have enough features yet.

Opublikowany : 11/06/2020 5:26 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: 3D Printers Anonymous

I have fair share of rolls too, I got some even before MINI arrived just because I liked the color or the filament was on sale. I poached some filaments from my father too, he does not use MK3S which I gave him for birthday all that much, I am hooked much more than he is. Though I try to restrain myself to printing only more or less practical stuff or things I momentarily need. I don't like busts very much (find those creepy for some reason) and I give tchotchkies to colleagues. That Horizon Tallneck figure does look tempting though ...

Opublikowany : 12/06/2020 10:50 am
jsw
 jsw
(@jsw)
Famed Member
RE: 3D Printers Anonymous
Posted by: @charles-h13

I officially have an addiction.  I have too many printers and my addition just keeps growing!

 

Does anybody have this problem?

Lemme tell you, all kidding about being addicted aside, a second printer would be very nice to have this weekend, although it would sit idle 99% of the other time.

I'm in the middle of doing some buildings for a model railroad urban setting (the first one of which is below) and the printer has been running almost steady for over 48 hours without an end in sight!  I've been letting the more time consuming pieces run overnight and sometimes setting my 'mental alarm' for the estimated completion time so I can get another print started.

Opublikowany : 13/06/2020 12:10 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: 3D Printers Anonymous

@jsw

My dad and I used to build toy trains.  I miss those days.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 13/06/2020 5:11 pm
jsw
 jsw
(@jsw)
Famed Member
RE: 3D Printers Anonymous
Posted by: @charles-h13

@jsw

My dad and I used to build toy trains.  I miss those days.  

I know, I missed it too.  That's one of the first things I got back into when I retired.

I first got into 3d printing, first at the local 'makerspace' and now with my own printer, mainly to be able to produce various model railroad items.  I first started with tunnel portals and went on to do an elevated station, some clone O scale cars, and now I'm doing an urban strip of buildings.

You ought to get back into it. 3d printing and model railroading go hand in hand.

Opublikowany : 13/06/2020 6:34 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: 3D Printers Anonymous
Posted by: @charles-h13

I officially have an addiction.  I have too many printers and my addition just keeps growing!

 

Does anybody have this problem?

I have a problem too. I don't have enough printers and no money 😋 !

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Opublikowany : 13/06/2020 6:42 pm
AnnieR
(@annier)
Reputable Member
RE: 3D Printers Anonymous

On the photography boards you will hear the expression GAS for Gear Acquisition Syndrome, as in those in the avocation the to accumulate cameras, lenses and accessories without bound.

I can't ever imagine more than one printer, but I can see the same principle applying. 

Opublikowany : 20/06/2020 5:24 pm
CovertPluto3502
(@covertpluto3502-2)
Trusted Member
RE: 3D Printers Anonymous

My 12 year old has his own 3D printer, my wife has 3, and I have 20 printers in the garage. Doesn’t seem like a problem at all.

Opublikowany : 26/06/2020 6:13 am
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: 3D Printers Anonymous

@covertpluto

No.  What do you do with them?  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 26/06/2020 8:57 am
karl-herbert
(@karl-herbert)
Illustrious Member
RE: 3D Printers Anonymous

@covertpluto

Did you start mass production with it or do you collect 3D printers? Some pictures?

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Opublikowany : 26/06/2020 10:35 am
CovertPluto3502
(@covertpluto3502-2)
Trusted Member
RE: 3D Printers Anonymous

@karl-herbert

I don't collect them, they are just there for my projects. They were producing some PPE, but not very much.

Opublikowany : 26/06/2020 11:23 am
CovertPluto3502
(@covertpluto3502-2)
Trusted Member
RE: 3D Printers Anonymous

@charles-h13

They are mainly for my projects, and I also do printing on demand. They were all producing PPE a month ago, not really mass production.

Opublikowany : 26/06/2020 11:24 am
Strona 1 / 2
Share: