Notifications
Clear all
Scaled freight transfer terminal
This was downloaded from one of the 'usual suspect' sites as an HO scale accessory. I was able to, with a bit of futzing around to deal with wonky .stl files, scale it up to O scale and it came out quite nice.
At anything close to proper scale, the long dimension of the building was more than the mK3S would handle, even diagonally, so I had to split it and assemble. The seam on the overhang on the dock is obvious. You don't notice the seams on the main part of the building unless you look for them. PS is very good at splitting the .stl files.
Again, please excuse the drill dust and clutter. This is very much a construction zone. 😉
Posted : 06/11/2020 2:17 am