Robot Arm: 6DoF 3D printed (Stepper motors)
 
Notifications
Clear all

Robot Arm: 6DoF 3D printed (Stepper motors)  

  RSS
Skyentific
(@skyentific)
New Member
Robot Arm: 6DoF 3D printed (Stepper motors)

During last half a year (or more), I have designed and 3D printed a 6DoF super precise Robotic Arm, using the stepper motors. The filament is Prusa orange PETG, the printer Prusa i3 MK3. I also build Arduino based electronics. And program it (including the inverse kinematics). I even have an Android application to control and program it. I have the build videos on my youtube channel: , https://www.youtube.com/c/Skyentific . The precision of this robot arm around 0.1mm. And all the files is in the open source: https://github.com/SkyentificGit/SmallRobotArm . Prusa i3 MK3 print everything perfectly!
Here some pictures:

Posted : 08/02/2019 2:44 pm
Steve
(@steve-3)
Estimable Member
Re: Robot Arm: 6DoF 3D printed (Stepper motors)

That is a very nice looking robotic arm. It looks very strong, especially judging by the size of the stepper motors near the base.

Steve

Posted : 08/02/2019 7:15 pm
Sean
 Sean
(@sean-7)
Trusted Member
Re: Robot Arm: 6DoF 3D printed (Stepper motors)

Oh man I have to build this! It looks incredible! Going to watch your videos now!

Posted : 23/02/2019 7:55 pm
Share: