Notifiche
Cancella tutti

Porta Potty Rocket  

Pagina 2 / 3
  RSS
jsw
 jsw
(@jsw)
Famed Member
RE: Porta Potty Rocket
Posted by: @cwbullet

@annier

Folks have flown a real port potty on an R motor. 

ROFL !!  😉

Empty or full?  😉  😉

Postato : 09/05/2021 12:28 am
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Porta Potty Rocket

First there was the Enterprise, then we had Challenger And Now,, brought to you by CWB Corp. we have "THE DEUCE"

 

Commencing count down, 2,,1,,Launch  

 

"Watch out space X were on your heals"

The Filament Whisperer

Postato : 09/05/2021 9:02 am
jsw
 jsw
(@jsw)
Famed Member
RE: Porta Potty Rocket

As I was waking up this morning, I was thinking of this project (why?) and realized that a porta-potty would be an appropriate accessory for the industrial area of the model RR.  LOL - goes well with the dumpster.   I did a search and there are tons of models available on the 'usual suspect' sites.  Thanks for the idea.  😉

Postato : 09/05/2021 10:07 am
bobstro
(@bobstro)
Illustrious Member
RE: Porta Potty Rocket

"Where no man has gone before..." 

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Postato : 09/05/2021 10:40 am
Swiss_Cheese hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

@swiss_cheese

Funny as always

--------------------
Chuck H
3D Printer Review Blog

Postato : 09/05/2021 11:57 am
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

@bobstro

And hopefully not down the crapper.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 09/05/2021 12:11 pm
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Porta Potty Rocket

Charles, you should post some videos of your launches. I'd enjoy them

The Filament Whisperer

Postato : 09/05/2021 5:26 pm
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

@swiss_cheese

I will post a few this week.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 09/05/2021 6:11 pm
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

Here is the porta-potty flying.  Not the next video, but it proves it flies.  

 

--------------------
Chuck H
3D Printer Review Blog

Postato : 10/05/2021 1:24 am
Clarmrrsn, Swiss_Cheese e jsw hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

Here is my level 3 flight 76 pound Nike Smoke:

--------------------
Chuck H
3D Printer Review Blog

Postato : 10/05/2021 1:26 am
Clarmrrsn, Swiss_Cheese e jsw hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

Another 3d printed rocket

 

--------------------
Chuck H
3D Printer Review Blog

Postato : 10/05/2021 1:28 am
Clarmrrsn, Swiss_Cheese e jsw hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

A snitch:

--------------------
Chuck H
3D Printer Review Blog

Postato : 10/05/2021 1:29 am
Clarmrrsn hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

My pulled from the trash rocket:

--------------------
Chuck H
3D Printer Review Blog

Postato : 10/05/2021 1:29 am
Clarmrrsn hanno apprezzato
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

The Nike Smoke above is a 2/3 scale.  I would like to do a full scale.  That would be 16 inches in diameter and 22 feet long.  The one in the photo was 11 inches in diameter and about 14 feet long.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 10/05/2021 1:44 am
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Porta Potty Rocket

Two things to say, 1) I really liked Nike Smoke, and 2) whats a snitch? I'm not familiar with that.

Thanks for posting the videos, I enjoyed them.

The Filament Whisperer

Postato : 10/05/2021 3:22 am
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Porta Potty Rocket

Two things to say, 1) I really liked Nike Smoke, and 2) whats a snitch? I'm not familiar with that.

Thanks for posting the videos, I enjoyed them.

The Filament Whisperer

Postato : 10/05/2021 3:23 am
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

@swiss_cheese

A snitch is an Estes Rocket Corporation kit from about 10 years ago.  It looks like a flying saucer.  I upscaled it.  It was about 20 cm in diameter and I upscaled that to 50 cm.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 10/05/2021 9:08 am
Clarmrrsn
(@clarmrrsn)
Honorable Member
RE: Porta Potty Rocket

@cwbullet

Some of the progress SpaceX have made on SN15 is amazing

I sat up until 4am watching one of early rocket tests last year.

This launch and landing is amazing, seeing the rockets steer it back down is so cool.

Tank you very much!

Postato : 10/05/2021 1:56 pm
cwbullet
(@cwbullet)
Utenti
Topic starter answered:
RE: Porta Potty Rocket

@clarmrrsn

I have watched all of those that are put on line or TV.  I love watching these flights.  

--------------------
Chuck H
3D Printer Review Blog

Postato : 10/05/2021 1:59 pm
Clarmrrsn
(@clarmrrsn)
Honorable Member
RE: Porta Potty Rocket

@cwbullet

The camera view of the launch and landing from Marscam at 8.12 is my favourite, The steering seems most visible from this angle.  A very clever design to steer it back into landing.

Their rates are rather reasonable if you fancy launching something a bit larger 😉  

$1M for 200kg to SSO with additional mass at $5k/kg. 

Wonder how much they will be charging for their proposed civilian flights to space, now that would be one to add to the bucket list.  Not sure I would afford it on my salary though. The general rule for something like this is "if you have to ask how much, you cannot afford it!"

Tank you very much!

Postato : 10/05/2021 2:35 pm
Pagina 2 / 3
Condividi: