Cura settings for the Original Prusa printers
 
Notifications
Clear all

Cura settings for the Original Prusa printers  

  RSS
Jakub Dolezal
(@jakub-dolezal-2)
Admin
Cura settings for the Original Prusa printers

Good News Everyone!
Josef and his team created a bundle of settings for the Cura software! After rigorous testing, we are happy to add support for Original Prusa printers. Use our step-by-step guide to import the settings 😉

 

Link to the guide (includes the package with settings):
https://help.prusa3d.com/en/guide/how-to-import-profiles-to-cura-4-x-windows-macos_17848

Direct link to the settings:
Original Prusa printers

Supported printers:

Original Prusa MINI
Original Prusa i3 MK3S
Original Prusa i3 MK3
Original Prusa i3 MK2.5S
Original Prusa i3 MK2.5
Original Prusa i3 MK2/S

Supported materials:
Prusament PLA
Prusament PETG
Prusa PLA
Prusa PETG
Prusa ABS

Supported OS:
Microsoft Windows
Apple macOS

Changelog:

07/2020
Version 1.5
- Support for Original Prusa MINI

04/2019
Version 1.4
- All files tested to comply with the Cura 4.0.0
- This version isn't compatible with the 3.x.x releases
- New settings improving the printing quality
- New material profiles for Prusament

10/2018
- Version 1.3
- All files tested to comply with the Cura 3.5.1
- Added files to folders Cura_printer_extruders with additional settings
- Correction for MK3 retraction 0.2 Fast

06/2018
- Version 1.2
- Original Prusa i3 MK3 all layer height profiles updated - retraction/infill/supports
- Original Prusa i3 MK2.5 all layer height profiles updated - retraction/infill/supports
- Original Prusa i3 MK2S all layer height profiles updated - retraction/infill/supports
- Note: Delete your old layer height profiles and import new ones.

06/2018
- Version 1.1
- Added support for Apple macOS

05/2018
- Version 1.0 [initial release]
- Support for Original Prusa i3 MK3 / MK2.5 / MK2S
- Support for Prusa ABS / PETG / PLA
- Support for Microsoft Windows
- Tested on Cura 3.3.1 x64

Happy printing, looking forward to your feedback and printing results 😉

Assembly manuals / Knowledge Base
The guy behind Prusa assembly manuals......
Posted : 03/09/2020 10:43 am
jsw
 jsw
(@jsw)
Noble Member
RE: Cura settings for the Original Prusa printers

Thank you!

I do use Cura (it was the first slicer I learned) for some things and I will definitely try this.

Posted : 03/09/2020 3:21 pm
jsw
 jsw
(@jsw)
Noble Member
RE: Cura settings for the Original Prusa printers

I don't see any instructions for Linux.  Is this omission significant?

I'll probably try to read between the lines and try to get this working, as I'm confident that at worst I can put things back the way they were.

Posted : 03/09/2020 3:24 pm
alidaf
(@alidaf)
Active Member
Doesn't work on OSX

This causes a fresh install of Cura on OSX to crash when adding the Mini+ printer.

Posted : 11/10/2021 1:57 pm
Share: