Thickness of shield from plexiglass
 
Notifiche
Cancella tutti

Thickness of shield from plexiglass  

  RSS
Paola
(@paola)
New Member
Thickness of shield from plexiglass

What is the thickness of  shield from plexiglass?

If someone can tell me where I can buy them? and how much those cost? 

Postato : 26/03/2020 9:42 pm
Steve
(@steve)
Estimable Member
RE: Thickness of shield from plexiglass

The community edition (and myself and some other people I know who don't have a laser cutter) ended up using laminating pouches. They're not as transparent as plexi but since the shields are 1-use only it's not that bad. The thickness should definitely be 125 microns or more for the laminating pouches. 80 is too flimsy. I assume the same thing applies to "regular" shields. The normal material used for the shields is APET and I think you can by that on rolls for cutting but I can't help you with that.

XL (5T) / MK4 / MK3S+-MMU3 / MK3S / MK2.5S-MMU2S / Mini / SL1S

Postato : 27/03/2020 7:52 am
Fred Meijer
(@fred-meijer)
New Member
RE: Thickness of shield from plexiglass

In Holland I bought PET sheet from Toemen Modelbouw. The protective foil on the sheets says: Covestro Vivak. Maybe this helps people finding the right sheets. I used 0,5 mm but 0,75 also fits in the Prusa head band frame. Sheets are 50 x 25cm

Postato : 27/03/2020 3:15 pm
Phil
 Phil
(@phil)
Eminent Member
RE: Thickness of shield from plexiglass

@fred-m8

Are these easy to cut and if so, how do you cut them?

Cheers

Phil

Postato : 02/04/2020 2:19 pm
Fred Meijer
(@fred-meijer)
New Member
RE: Thickness of shield from plexiglass

Kitchen scissors and perforator for the holes - easy.

BTW I used the carton inner part of a Prusament reel for the lower corners.

Postato : 02/04/2020 3:13 pm
Phil hanno apprezzato
Condividi: