Stacked Version of Protective Visor by 3DVerkstan
I am hoping the someone could help me with an STL and setting for printing the Protective Visor by 3DVerkstan in stacked configuration. I participating in the Hack-a-day group that is sending them to New York. I utilized there recommended setting and currently can print 2 in an hour but as I am in a critical industry, most of the day I am away from home and can't reset to print the next one causing about 9-10 hour of down time and another 7 while I am sleeping.
Any help would be appreciated.
I have attached his file here just so I get the right one. (Visor Frame North America Letter V3, Version 8 - Mar 29, 2020). Link to his design https://www.youmagine.com/designs/protective-visor-by-3dverkstan/ All rights and credits belong to him.
RE: Stacked Version of Protective Visor by 3DVerkstan
Not to discourage you, but reports on the local (US MA) Masks for Doctors slack discussion are that the stacked masks have a high failure rate. They're discouraging stacked prints. YMMV.
RE: Stacked Version of Protective Visor by 3DVerkstan
@bobstro
Thanks for the heads up.
RE: Stacked Version of Protective Visor by 3DVerkstan
" I participating in the Hack-a-day group that is sending them to New York. I utilized there recommended setting and currently can print 2 in an hour. " Check out "iqless" on YouTube. He seemed to be having some success. Could you please share those recommended settings from the Hack-a-day group?