Simple face shield - help with stacking?
 
Notifications
Clear all

Simple face shield - help with stacking?  

  RSS
danlipsky0
(@danlipsky0)
New Member
Simple face shield - help with stacking?

Hi all, The face fields from Prusa are awesome, but require more time and materials to print.  It's hard enough getting supplies right now so I'm using a model from 3dverkstand.se that I modified slightly (the fracture point at the front was cracking too easily so I smoothed it out).  

I'd really like some help if someone can instruct me on how to stack these so they print and can be broken off separately on a Prusa i3 mk3.  I tried to look up the info but I can use one of you gurus to help.  I've attached the file, please let me know how I can stack these.  https://www.thingiverse.com/thing:4253822   It's the file titled:  Flattened_Mask.stl

Thanks in advance!

Posted : 06/04/2020 4:27 am
Ooj
 Ooj
(@ooj)
Active Member
RE: Simple face shield - help with stacking?

I also want to know this.

Prusa MK3S with MMU2S
Prusa Slicer 2.1

Posted : 06/04/2020 8:30 pm
Steve
(@steve-36)
Eminent Member
RE: Simple face shield - help with stacking?

Could you share the settings you are using to print this on your mk3?  I'm having trouble with the sides getting printed with a gap in the middle.

Posted : 08/04/2020 1:10 am
danlipsky0
(@danlipsky0)
New Member
Topic starter answered:
RE: Simple face shield - help with stacking?

@steve-b8

I'm not printing any stacked, I'm asking if anyone knows how to set it up so I can print a stack to make sure it comes out right...  

Posted : 09/04/2020 4:11 am
Sembazuru
(@sembazuru)
Prominent Member
RE: Simple face shield - help with stacking?

See this thread for some tips and tricks:

https://forum.prusa3d.com/forum/prusaslicer/stacking-how-to-set-up-in-prusaslicer/

See my (limited) designs on:
Printables - https://www.printables.com/@Sembazuru
Thingiverse - https://www.thingiverse.com/Sembazuru/designs

Posted : 09/04/2020 5:30 am
Share: