3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!
 
Benachrichtigungen
Alles löschen

3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!  

Seite 2 / 5
  RSS
gavin.howlett39
(@gavin-howlett39)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

@clairegiles1972

Hi, no.... Have been contacting load as live in Ipswich Suffolk UK to see if I could help but not sure who is heading this up in our aera

Veröffentlicht : 31/03/2020 7:58 am
406661200
(@406661200)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

N95 mask,disposable protective suit

Price:Negotiable,depends on quantity ordered
Certificate: CE,FDA

50 Pcs Disposable Face Masks Thick 3-Layer Masks
Color & Style : Blue Ear-loop
Filtration Rate: BFE > 95%
Fluid Resistance/Anti-fog: Fluid resistant
Packaging: 50 PCS
FFP2 N95 Safety Mask 5 Layer Air Filter (5pcs) /FFP2 N95 Safety Mask 4 Layer Air Filter (20pcs)
Particulate Respirator mask is made of high-quality cotton and non-woven fabric, which is non-irritating and non-allergenic to you. Its filtration efficiency (dust-removing rate) is more than 95% for non-oily particulate matter above 0.075 microns, and the filter material is harmless to the human.
Disposable Coveralls With Hood Protective Suit
High quality tough composite fabric
Features
Ample protection against small particles
Disposable
Elastic wrist seal
Front zipper seal
Lighter and cooler than many other styles
Greater freedom of movement and durability
Coveralls are generously cut in the seat and arms to ensure that you won't experience any rips during usage
Minimum Order Qty: 20,000 Pieces
You can buy samples from: https://92mask.com/

Veröffentlicht : 31/03/2020 8:38 am
Medic57
(@medic57)
Eminent Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

Can anyone tell me where to find the information for the plexi on where exactly the holes are supposed to go? And can we get these pre -cut ready to go?

Veröffentlicht : 31/03/2020 2:47 pm
Medic57
(@medic57)
Eminent Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

Is there any support here at all????

 I have asked several questions and don't seem to be getting anywhere with this project!

Where do you get the information on the clear shields???? How big, how thick, Where are the holes cut for the mounting?

What material are we using for the elastic headbands?

Any help would be appreciated.

 

Veröffentlicht : 31/03/2020 3:36 pm
Milhooz
(@milhooz)
Trusted Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

@danie-vandenberg

Don't tell me to think, the link I send is HHS approved version not my version. It is not my fault, the question asked was a 3 holes US version so I've looked for one approved in the USA. Instead of telling something like this, why don't you provide another answer that is more suitable if you don't like mine?
Myself, i'm in Europe and I'm printing the Prusa version as it has been approved by French hospital staff.

@medic56

Prusa released a guide how to assemble along with FAQ where there are telling that any standard elastic band will work: https://help.prusa3d.com/en/article/3d-printed-protective-face-shields-faqs_125479#where-can-i-get-the-transparent-visor-and-the-rubber-band

Initially they recommended to use something like this https://www.amazon.com/Yards-4-inch-Buttonhole-Elastic-White/dp/B00W3G33U8
This is more convenient but it is difficult to source it now as you can imagine. If you find it, I think it is still one of the best options.

Veröffentlicht : 31/03/2020 4:04 pm
JCCBSL
(@jccbsl)
Eminent Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

We have been using a different head band design.  This one is designed to work with an overhead transparency sheets from office supply stores as the shield, punched with a standard 3 hole punch.  These are taking my MK3 1 hour and 15 minutes at 100%  and at an hour for 150%. 

https://www.dropbox.com/s/ae1xxa77cwlvid5/Face%20shield%20headband.STL?dl=0

I am looking for a way to change speeds based on layers.  I think what might work well would be 100% for the top and bottom layers, and 150 (or faster) on the infill layers.  Any suggestions?

Veröffentlicht : 31/03/2020 6:11 pm
bobstro
(@bobstro)
Illustrious Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!
Posted by: @medic56

Is there any support here at all????

 I have asked several questions and don't seem to be getting anywhere with this project!

Where do you get the information on the clear shields???? How big, how thick, Where are the holes cut for the mounting?

What material are we using for the elastic headbands?

Any help would be appreciated.

If you're in the US, I urge you to join the Masks for Docs (MFD) slack group. There is a wealth of information there, including sub-groups set up for each regional area. I found that specific instructions vary depending on the hospitals being supported, so local info is your best bet for success. I was also able to quickly locate someone in my town who has the parts for assembling shields, but is bottlenecked with 3D parts. I'm hoping to drop off a batch to him tomorrow. 

The Massachusetts group is putting together detailed instructions, but they're still a work in progress. Ask for specifics in your area. 

I've put together some notes on the settings and procedures I'm using.

Good luck and please update us on your progress.

 

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Veröffentlicht : 31/03/2020 7:08 pm
john134
(@john134)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

@gavin-howlett39

Hi Gavin,

 

I have just signed up with.  https://www.3dcrowd.uk/ .   Looks like a very professional setup.  I am printing the first one in PETG  on my my mk 2.5s as I type this!

 

John

Veröffentlicht : 01/04/2020 6:25 pm
katesmith1304
(@katesmith1304)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

i have some contacts who can help. please inform about the requirement 

Veröffentlicht : 01/04/2020 9:17 pm
wagner.h2o
(@wagner-h2o)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!
Hi guys.

Many brazilians are printing RC shields and some lack of expertise to understand the instructions, especially the cleaning.
 
Can I translate to portuguese every material you have for the RC face shields? Can I post it online ?
You could post it at your website also.
Thank you all!
 
Veröffentlicht : 02/04/2020 3:02 am
biomed27
(@biomed27)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!
Posted by: @medic56

I am a Paramedic that works in a children's hospital in Fort Worth Texas. I want to help build these masks. Our Anesthesiologists are currently reusing their masks every day. I have a MK3S on the way. I currently have a DaVinci pro. I can start building the frames now. Can anyone direct me as to where I can purchase the clear shields? I'm Thinking I can use the laser on the DaVinci to cut the plastic.

Thanks in Advance!

Ricky

Hey I am in fort worth too! I am ready to start helping, but not sure where to start. My printer is set up and ready to go.

Veröffentlicht : 02/04/2020 4:30 am
bobstro
(@bobstro)
Illustrious Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!
Posted by: @biomed27
Posted by: @medic56

I am a Paramedic that works in a children's hospital in Fort Worth Texas. I want to help build these masks. [...]

Hey I am in fort worth too! I am ready to start helping, but not sure where to start. My printer is set up and ready to go.

I suggest joining the Masks for Docs Slack discussion. They have a lot of sub-groups for specific areas and you should be able to coordinate there. The slow speeds of 3D printing seem to be a bottleneck, so you may find that your best contribution is simply cranking out 3D printed parts and letting a central team procure the shield material, assemble and disinfect. The keeps the clear material from being distributed among thousands of individual makers who may not be able to produce enough frames, and also ensure consistent quality and disinfection. Some local makerspaces are acting as central hubs for assembly and distribution.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Veröffentlicht : 02/04/2020 4:56 am
ksadil
(@ksadil)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

I am printing these, but have serious adhesion issues. Added these small 1 layer disk tabs and tape them down after first layer printed.

Working well I thought until I saw this:  "Check this print for stacked versions (1h 20min per pcs)."

Mine are taking about 9 hours to print (the 2 pieces in one print session), clearly I am not a professional 3d printer (yet). Sorry I have a different manufactured printer but it is a prusa type printer with a heated bed. Printing on a glass bed with hairspray, 0.4mm nozzle, 0.2mm layer height, in PLA. Quality improved massively when I built an enclosue. Distribued only 4 units to date.

 

Any assistance would be appreciated.

 

Regards,

Kim

 

Thanks,

Kim

Veröffentlicht : 02/04/2020 5:48 am
bschena
(@bschena)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

@gavin-howlett39

Hi would you be able to print some and donate to NHS?

thank you 

Veröffentlicht : 03/04/2020 7:40 am
john134
(@john134)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

@gavin-howlett39

Hi gavin...   I have signed up with 3dcrowd.uk.    DPD will collect batches of 20 for free.   

Am based north of London with prusa mk2.5s.   prints beautifully in PETG

Seems legit

 

John

Veröffentlicht : 03/04/2020 9:13 am
john.f7
(@john-f7)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

@gavin-howlett39

I joined this UK group https://www.3dcrowd.uk/

They have organised production of the transparent visors (harder to source materials). DPD have offered to ship batches of 20+ headbands that volunteers print to the assembly site for free.

Veröffentlicht : 03/04/2020 12:20 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

@john-f7

That's Good News!

 

regards Joan

 

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Veröffentlicht : 03/04/2020 2:03 pm
john.f7
(@john-f7)
New Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

@medic56

See the details tab on the visor page https://www.prusaprinters.org/prints/25857 , in the section "Visor PDF drawings" there are drawings with dimensions. I found it difficult to find clear sheets for the visor, but was able to contribute 3d printed headbands by joining this group: https://www.3dcrowd.uk/

John

 

Veröffentlicht : 03/04/2020 2:07 pm
SteveEJ
(@steveej)
Active Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

@john-c97

Out of stock on Amazon. Any other ideas?

Veröffentlicht : 03/04/2020 2:30 pm
SteveEJ
(@steveej)
Active Member
RE: 3D PRINTED FACE SHIELDS FOR MEDICS AND PROFESSIONALS - JOIN US!

What type of material for the face mask? Is Clear Chemical-Resistant PVC film 0.04 mm or more good?

 

Thanks

Veröffentlicht : 03/04/2020 2:42 pm
Seite 2 / 5
Teilen: