Notifications
Clear all

weird artifacts in some regions of the first layer  

  RSS
yardarrat
(@yardarrat)
New Member
weird artifacts in some regions of the first layer

Hi everybody,

whenever I print something I get these lines sometimes in combination with bad bed adhesion

I have no clue if the printing community has a name for this - I tried searching but was not quite able to find help.

What I did find is that other posts were discussing skew in the assembly so I went ahead and got myself the bed level visualizer plugin.

this was the first result. So I loosened the 3 screws added some shiming and retightens everything. I also went ahead and tried everything explained in thins article:

https://help.prusa3d.com/en/article/xz-axis-skew-correction-mini_158518

The result afterwards was this:

I am not quite sure if what I am trying makes sense or if the problem is elsewhere completely.

hope somebody can help. thanks!

Posted : 12/11/2020 10:40 am
yardarrat
(@yardarrat)
New Member
Topic starter answered:
RE: weird artifacts in some regions of the first layer

Well... The shimming and skew adjustment let to this.

I am not happy 🙁 Quality was way better before tampering with the printer...

anybody who knows how to fix the original issues? I hope I will be able to revert back to them since they annoy me way less than what's happening now...

This post was modified 1 year ago 2 times by yardarrat
Posted : 12/11/2020 3:04 pm
Share: