Need Help for stringing with prusament PLA but not with green tec pro PLA on Mini +
 
Notifications
Clear all

Need Help for stringing with prusament PLA but not with green tec pro PLA on Mini +  

  RSS
b.klemme
(@b-klemme)
New Member
Need Help for stringing with prusament PLA but not with green tec pro PLA on Mini +

  Hello ,

I still have stringing problems with my Pursa Mini + bought in mai 2021 , and now I noticed that I don't have these porblems when printing Green tec pro PLA (Extrudr).

I tried some modifications , like retraction and speed ortemperature, but never resolved this problem.

The printed models on the photos have been printed with exactly the same parameters (other  PLA 0,05 MM )

Posted : 27/10/2021 10:30 am
cwbullet
(@cwbullet)
Illustrious Member
RE: Dried?

Have you tried drying the Prusament?  Are you using Prusament settings in PrusaSlicer?

--------------------
Chuck H
3D Printer Review Blog...
Posted : 28/10/2021 1:41 am
b.klemme
(@b-klemme)
New Member
Topic starter answered:
RE:

Original prusa settings. Filament was New out of the Box. Have the stringing Problem all the time I would say ans with different Material petg Abs Pla but à bit less with green tec pro PLA

 

This post was modified 4 weeks ago by b.klemme
Posted : 11/11/2021 1:00 pm
BogdanH
(@bogdanh)
Honorable Member
RE: Need Help for stringing with prusament PLA but not with green tec pro PLA on Mini +
Posted by: @b-klemme

...Filament was New out of the Box...

I take that for you didn't dry the filament.

New sealed filament, never had problem before, same with other brand filament, I live in Nevada,... -all that means nothing. Proper filament drying is important first step to prevent printing problems.

[Mini+] [MK3S+BEAR]...
Posted : 11/11/2021 5:01 pm
Share: