Notifications
Clear all

2nd layer over and under extruding  

  RSS
laser kitty
(@laser-kitty)
New Member
2nd layer over and under extruding

so this just started to happen today

prusa pla setting

1st layer is going down great 

the 2nd layer and the layers after are having big globs in spots and the under extrusion in other spots.

i ran this print to see what the top layers would look like and it was the same as the 2nd (and up)

looks like the same pattern happening in the same spot on different  prints ive tried. could it be the bed? i was thinking the minda is bad?

i printed probably 20 prints without any issue this started out of nowhere. my machine is only about 3 weeks old

trying different

Posted : 18/12/2020 6:40 am
Ryssen2
(@ryssen2)
New Member
RE: 2nd layer over and under extruding

I saw the same with my printer. Seems many are seeing it as there are many threads here about it. Try increasing print temp to 220 or 225.

Dont forget to clean the feeder gear. 

Posted : 26/12/2020 9:06 pm
remington liked
Ryssen2
(@ryssen2)
New Member
RE: 2nd layer over and under extruding

Also this video I have seen and now used the fix in:

Posted : 27/12/2020 1:21 am
avh and remington liked
avh
 avh
(@avh)
Eminent Member
RE: 2nd layer over and under extruding

I had exactly the same problem, and the exact same fix worked for me as well!

Posted : 28/12/2020 12:01 pm
Share: