Prusa3D Forum

Benachrichtigungen

Alles löschen

phil.s2

Gruppe: Registriert

Beigetreten: 2017/05/03

Eminent Member

	just remember that with this wrap you will need to push any ... Im Forum Others (Archive)	Vor 7 years
	hi tj it sounds like a frustrating problem the simple answe... Im Forum Others (Archive)	Vor 7 years
	george with loading the filament there is very little press... Im Forum Others (Archive)	Vor 7 years
	peter, start to build up a set of design rules for your prin... Im Forum Others (Archive)	Vor 7 years
	the holes in the base plate look round - with the oval hole... Im Forum Others (Archive)	Vor 7 years
	hi - that print looks like it has been skipping teeth on the... Im Forum Others (Archive)	Vor 7 years
	hi - it is worth persevering with the printer - they can be ... Im Forum Others (Archive)	Vor 7 years
	hi - it could be a really simple problem - a lot of the time... Im Forum Others (Archive)	Vor 7 years
	i don't think it will have broken the tracks - it may have d... Im Forum Others (Archive)	Vor 7 years
	you have the ability to see small - why not set it up to see... Im Forum Others (Archive)	Vor 7 years
	that looks excellent corey Im Forum Others (Archive)	Vor 7 years
	hey corey i tend to use the default in cura i notice you ar... Im Forum Others (Archive)	Vor 7 years
	i have had this in the hot end occasionally i would get min... Im Forum Others (Archive)	Vor 7 years
	looking at the black bits in the pull, could they be bits of... Im Forum Others (Archive)	Vor 7 years
	when you are cleaning out the hot end - please be careful of... Im Forum Others (Archive)	Vor 7 years
	hi corey, this is what happens when you need to tweak your ... Im Forum Others (Archive)	Vor 7 years
	it definitely looks like the belts are slipping did you hear... Im Forum Others (Archive)	Vor 7 years
	hi brad i feel your frustration i have not had it clump as ... Im Forum Prusa i3 kit (Archive)	Vor 7 years
	Hi John, i was under the impression you were replacing the p... Im Forum Others (Archive)	Vor 7 years
	as the heated bed is made up of a pcb is it possible that th... Im Forum Others (Archive)	Vor 7 years

Seite 1 / 2 Nächstes

Forums-Statistiken

535 Foren

59.6 K Themen

427.1 K Beiträge

15 Online

64 K Mitglieder

Letzter Beitrag: MMU3/MK4 - LACK enclosure Unser neuestes Mitglied: Charles Jacques Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen