|
@karl-herbert Thanks for the reply, looking back on the earl... Dans le forum User mods - OctoPrint, enclosures, nozzles, ... |
il y a 3 years |
|
Hi.. anyone know the CFM for the fan of the MW320/24v ? Tryi... Dans le forum User mods - OctoPrint, enclosures, nozzles, ... |
il y a 3 years |
|
Check the settings of the cooling fan see if they match the ... Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
Print a 35x35 sqaure thats only 0.2 thick and post back your... Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
Further testing this is the results, the Live Z adjusted as ... Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
File is 35x35 by 0.3 square thickness left is printed with d... Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
Okay yes, now I know where am getting things not right, misr... Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
Did some more testing on the subject and now noticing there ... Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
I am going to restest this one more time, but I am very sure... Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
I am not sure as to why, but in all honesty I used to do one... Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
This one is for the prusa slicer
prusaslicer.jpg Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
This one is for the simplify3d
Attachment removed Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
Overlap % VS Layer Height Dans le forum How do I print this? (Printing help) |
il y a 4 years |
|
@neophyl Thank you for the feedback, I started using it a co... Dans le forum Hardware, firmware and software help |
il y a 4 years |
|
Good thing I asked, since most of the time am printing with ... Dans le forum Hardware, firmware and software help |
il y a 4 years |
|
I just noted something in the startup code under prusa slice... Dans le forum Hardware, firmware and software help |
il y a 4 years |
|
No different, so far so good, but I need to monitor a little... Dans le forum Hardware, firmware and software help |
il y a 4 years |
|
Also in regards to your scripts is it not better to have the... Dans le forum Hardware, firmware and software help |
il y a 4 years |
|
@bobstro Correct I did not find this in the configuration.h ... Dans le forum Hardware, firmware and software help |
il y a 4 years |
|
@bobstro On the following pagebr />Line 65 of your S3d scrip... Dans le forum Hardware, firmware and software help |
il y a 4 years |
