|
You have to try different combinations of external perimeter... In forum PrusaSlicer |
4 years ago |
|
With a combination of "avoid crossing perimeters" and extrus... In forum PrusaSlicer |
4 years ago |
|
Try to adjust your extrusion width to avoid those moves. In forum PrusaSlicer |
4 years ago |
|
I agree with you, safety first.I've read this thread many ti... In forum User mods - OctoPrint, enclosures, nozzles, ... |
4 years ago |
|
Sorry for you 🙄 In forum User mods - OctoPrint, enclosures, nozzles, ... |
4 years ago |
|
I was aware of that and i took my Fluke multimeter with ther... In forum User mods - OctoPrint, enclosures, nozzles, ... |
4 years ago |
|
As Guykuo said that current settings doesn't affect silent m... In forum User mods - OctoPrint, enclosures, nozzles, ... |
4 years ago |
|
Hi all I have OMC 0.9 for X and Y working nicely since the b... In forum User mods - OctoPrint, enclosures, nozzles, ... |
4 years ago |
|
Try without cooling, temp is the first paramete, cooling is ... In forum PrusaSlicer |
4 years ago |
|
100% filled parts needs a very precise extruded quantity of ... In forum PrusaSlicer |
4 years ago |
|
1.03 for me, but many parameters (including this one) are ma... In forum PrusaSlicer |
4 years ago |
|
Yes Armadillo is a very strong material. Dimensionnal accura... In forum PrusaSlicer |
4 years ago |
|
More than a matter of price, you have to draw your parts for... In forum PrusaSlicer |
4 years ago |
|
AMHA, too much support to print with a 80$/kg filament. Find... In forum PrusaSlicer |
4 years ago |
|
Hi Maybe it will be more than 12 hours... 🤔 I'm working wit... In forum PrusaSlicer |
4 years ago |
|
Hi You can put custom GCODE before layer change in the print... In forum PrusaSlicer |
4 years ago |
|
@bobstro It makes blobs when the extruder comes from the out... In forum PrusaSlicer |
4 years ago |
|
Here's another sample, 1 layer thick, 2 "crowns", inside per... In forum PrusaSlicer |
4 years ago |
|
@bobstro Yes, those moves move with the seam on each layer.N... In forum PrusaSlicer |
4 years ago |
|
...and i'm using 2.2.0 version. In forum PrusaSlicer |
4 years ago |
