Activity
 
Notifications
Clear all
kirby
kirby
Group: Registered
Joined: 2018/07/12
Trusted Member
3
But these are VERY related. Example. What happens when somet...

In forum Improvements (Archive)

1 year ago
It's on a paver now. The clearance I want is between the sur...

In forum User mods - OctoPrint, enclosures, nozzles, ...

1 year ago
Taller feet ok for MK3?

In forum User mods - OctoPrint, enclosures, nozzles, ...

1 year ago
Ok, so if you did the downgrade without touching the belts, ...

In forum Hardware, firmware and software help

1 year ago
Using this bracket for the PSU I moved the power panic over ...

In forum User mods - OctoPrint, enclosures, nozzles, ...

1 year ago
Thanks to all that helped. I got this up and working! @willi...

In forum User mods - OctoPrint, enclosures, nozzles, ...

1 year ago
Many think the stock PSU is marginal at 240W. Adding 5-12W f...

In forum User mods - OctoPrint, enclosures, nozzles, ...

1 year ago
@charles-h13 Thanks for those links. I've been using the LRS...

In forum User mods - OctoPrint, enclosures, nozzles, ...

1 year ago
:facepalm 🖐️ I do. That's embarrassing, I should have thoug...

In forum User mods - OctoPrint, enclosures, nozzles, ...

1 year ago
Here are some images that are confusing me: Regular 2-PIN DC...

In forum User mods - OctoPrint, enclosures, nozzles, ...

1 year ago
So I ended up with an LRS-350-24, and over the weekend print...

In forum User mods - OctoPrint, enclosures, nozzles, ...

1 year ago
Trying to set belt tension on MK3->MK3S upgrade, 3.90-3421 f...

In forum Hardware, firmware and software help

1 year ago
Ordering Smooth PEI sheets in the United States?

In forum General discussion, announcements and releases

1 year ago
Cool, thanks. I'm partial to SublimeText, so I'll use that w...

In forum Hardware, firmware and software help

2 years ago
PETG warping sometimes points to a low bed temp. Agree with ...

In forum Hardware, firmware and software help

2 years ago
PrusaSlic3r: How to compare printer profiles?

In forum Hardware, firmware and software help

2 years ago
Agree, I did it cold at first and basically had to start ove...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 years ago
Nevermind, this page says I should upgrade the firmware.

In forum Hardware, firmware and software help

2 years ago
I couldn't find a way to leave a comment on the github repo,...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 years ago
Update: I finally did this swap on my MK3. I used: MeanWell...

In forum Hardware, firmware and software help

2 years ago
Page 2 / 5
Share: