Peter Susán
Peter Susán
Group: Registered
Joined: 2020/06/12
Eminent Member
2
Yeah, I know, I learned the lesson multiple times 🙂 but fin...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
Well, besides the first layer adhesion (the first try was a ...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
I found ~1.5m of remaining Prusament Galaxy PLA in my bin, s...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
@skreelink When I was testing this, I used the same filament...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
@aurru I don't know if you followed the thread from the begi...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
Well, the benchy came out perfect also. It was a totally def...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
Ok, I finally pulled myself together and disassembled the wh...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
I was monitoring the temperatures when I was investigating t...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
@prusatester2020 I think you're right about this, and I also...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
Well, it's a possibility, but in that case, it would be stil...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
Yeah, sure, I will. Fortunately, for me, the original heatbr...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
Ok, I did three runs with the Bondtech heat-break: Prusament...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
I'll do an autotune then, will see three cubes with the new ...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
how do you do an autotune on the mini? via octoprint? as far...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
Thanks for the reminder, though the E415 is the esteps value...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
I've done three consecutive prints in vase mode (simple 2cm ...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
I'm also thinking something like your Option 2... When I wil...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
Yes, it is quite exactly the same for me also. When I clean ...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
@boatbuilder Actually, besides the original Prusa nozzle, I'...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
This is definitely the issue I'm having with these thin wall...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 months ago
Page 1 / 2
Share:

Please Login or Register