Notifications
Clear all
delamarre.frederic
delamarre.frederic
Group: Registered
Joined: 2019/08/04
Eminent Member
2
You have to try different combinations of external perimeter...

In forum PrusaSlicer

2 years ago
With a combination of "avoid crossing perimeters" and extrus...

In forum PrusaSlicer

2 years ago
Try to adjust your extrusion width to avoid those moves.

In forum PrusaSlicer

2 years ago
I agree with you, safety first.I've read this thread many ti...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 years ago
Sorry for you 🙄

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 years ago
I was aware of that and i took my Fluke multimeter with ther...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 years ago
As Guykuo said that current settings doesn't affect silent m...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 years ago
Hi all I have OMC 0.9 for X and Y working nicely since the b...

In forum User mods - OctoPrint, enclosures, nozzles, ...

2 years ago
Try without cooling, temp is the first paramete, cooling is ...

In forum PrusaSlicer

2 years ago
100% filled parts needs a very precise extruded quantity of ...

In forum PrusaSlicer

2 years ago
1.03 for me, but many parameters (including this one) are ma...

In forum PrusaSlicer

2 years ago
Yes Armadillo is a very strong material. Dimensionnal accura...

In forum PrusaSlicer

2 years ago
More than a matter of price, you have to draw your parts for...

In forum PrusaSlicer

2 years ago
AMHA, too much support to print with a 80$/kg filament. Find...

In forum PrusaSlicer

2 years ago
Hi Maybe it will be more than 12 hours... 🤔 I'm working wit...

In forum PrusaSlicer

2 years ago
Hi You can put custom GCODE before layer change in the print...

In forum PrusaSlicer

2 years ago
@bobstro It makes blobs when the extruder comes from the out...

In forum PrusaSlicer

2 years ago
Here's another sample, 1 layer thick, 2 "crowns", inside per...

In forum PrusaSlicer

2 years ago
@bobstro Yes, those moves move with the seam on each layer.N...

In forum PrusaSlicer

2 years ago
...and i'm using 2.2.0 version.

In forum PrusaSlicer

2 years ago
Page 1 / 2
Share: